Product characteristics
| Type of light | red light |
| Laser protection class | 2 |
Application
| Special feature | Background suppression |
Electrical data
| Operating voltage[V] | 10…30 DC; (“supply class 2” to cULus) |
| Current consumption[mA] | 75; (24 V) |
| Protection class | III |
| Reverse polarity protection | yes |
| Type of light | red light |
| Wave length[nm] | 650 |
| Typ. lifetime[h] | 50000 |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2 |
Outputs
| Total number of outputs | 2 |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (complementary) |
| Max. current load per output[mA] | 100 |
| Switching frequency DC[Hz] | 11 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Detection zone
| Max. light spot diameter[mm] | 5 | |
| Light spot dimensions refer to | 2 m | |
| Detection range hysteresis[%] | < 2 | |
| Note on monitoring range hysteresis |
|
|
| Background suppression available | yes | |
| Background suppression[m] | < 20 |
Measuring/setting range
| Measuring range[m] | 0.03…2 |
| Sampling rate[Hz] | 33 |
Interfaces
| Communication interface | IO-Link | ||||
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis | ||||
| SIO mode | yes | ||||
| Process data analogue | 1 | ||||
| Process data binary | 1 | ||||
| Min. process cycle time[ms] | 6.6 | ||||
| Supported DeviceIDs |
|
Operating conditions
| Ambient temperature[°C] | -25…60 | |
| Note on ambient temperature |
|
|
| Protection | IP 65; IP 67 | |
| Max. immunity to extraneous light[klx] | 10; (on the object) |
